Hi
Just had this problem today, i tilted the washer onto its side and a load of water came out the bottom. It is working again now. Hope this helps.
Ian December 2008 |
Hi mate, just had the same problem, empty the salt container with a towel/paper towel as much as possible and bring the machine forward enough to tilt it back with the drain pipe as low as possible, I removed mine from the waste and put it into a bucket on the floor. As soon as as a load of water has come out of the pipe, in my case about half a pint, the machine will reset and you can re-connect it all.
Neil March 2008 |