As you've managed to take it apart & reassemble check the heater box in the handle base, behind the red light. It has a maze of water channels that get gunged up. Take care when taking apart as there are small washers between the lid and base for each screw hole.
A quick check if this is the problem. Spray from accessory setting OK but not from floor setting = clogged heater box.
Fixit Lewis September 2006 |
I took it apart checked all the lines and found no clogs anywhere. Then I put it back together and it still does not run. WHat should I check next?
Diana July 2006 |
Ours did the same thing. We found the tubes that dispense water and solution were clogged. I think clogged from not letting water run continously after use. We had to take completely apart and unclog the tubes.
Jackie January 2006 |