we had this problem and found that at the back the waste hose had worn a hole through as it had rubbed on the back panel because fitting had come loose
mark b February 2010 |
Thanks Chris for your very prompt reply. Is it possible to patch the hole or do I need to buy a new door for the seal? I assume the seal is accessed from the bottom of the machine somehow...Cheers Debbie
Debbie Kilmartin July 2007 |
Debbie sounds like the door to drum seal has a hole in it ..... more likely to be near to the top of the seal where the water is "thrown" during the high speed spin.
Chris July 2007 |