I gave up looking for the 'Pacific' seals and used the old seals as a pattern to cut out new seals. Now working OK for two years!
George V Crowe December 2010 |
see my reply august 2010....stock has now dried up....sorry to disappoint anyone
brian November 2010 |
I can still obtain stock of genuine originals PV030 (top flush) and have 6 sets in stock complete with fill valves. Call me if you are stuck: Brian 0161 723 4228
brian August 2010 |
www.toiletspares.co.uk has got the complete valve instock. £35+vat delivered, not cheap but an easy answer
billylad May 2010 |
any one looking 4 a pacific valve i have just got one from mark two (wickes suppliers)29/10/09 it based in bolton very helpful
paul h prescot October 2009 |
Hi I have recently had to replace a pacific siphon and got one from pulsardirect.co.uk item sc5011, have a look before purchasing.
Dee June 2009 |
I got the parts direct from macdee - polypipe you can google them. cheaper and vthat plumb shops and quick delivery
neil January 2009 |
Please note both seals and the piston assembly complete with seals can still be bought from me.
Anyone wishing to buy replacement seals for the Pacific valve can email me at sales@insumo-uk.com
Only a limited number of spares left so buy now before they are all gone!
insumo September 2008 |
Anyone wanting spares can email me at insumo-uk.com.
Set of main piston valve seals £5.00 in P&P
Insumo September 2008 |
I have a similar problem with a Macdee "Pneu-Compact". I couldn't find replacements anywhere. Enquiries at 01302 792115 tell me I have to order a new inlet valve, which I have done.
Brian July 2008 |
they were discontinued over 2 years ago.
call derwent macdee on 01302 792115 for alternative
big d June 2008 |
Hi there. I have had the same problem. Cleaning the washer worked for a while. Call the supplier on 01302 792115 with the size of the diameter of the valve hole (once the syphon is taken out - either 2 inch or one and a half inch - I think) and they will send you a replacement syphon that will fit. The Pacific model was discontinued 2 years ago. good luck, Sandy
Sandy Wilson May 2008 |
Hi there. I have had the same problem. Cleaning the washer worked for a while. Call the supplier on 01302 792115 with the size of the diameter of the valve hole (once the syphon is taken out - either 2 inch or one and a half inch - I think) and they will send you a replacement syphon that will fit. The Pacific model was discontinued 2 years ago. good luck, Sandy
Sandy Wilson May 2008 |
Try www.cisternspares.co.uk
Andrew May 2008 |
I'm having the same problem. I stripped and cleaned mine and have kept it going for a little longer.
It was sold as a Polypipe product code: PMPC5. I looked on the polypipe website (www.polypipe.com) but they don't list it anymore.
Their contact details are:
Polypipe Ltd
Warmsworth Halt Ind. Est.
Warmsworth
Doncaster
DN4 9LS
Tel: 01302 310666
Good luck
Adrian April 2008 |