I HAD THE SAME PROBLEM HERE.S HOW I SOLVED IT. IT.S THE SWITCH ON THE FRONT OF THE FRIDGE NOT MAKING CONTACT WHEN YOU TURN THE SELECTOR KNOB TO GAS POSITION.WORK KNOB BACK AND FORWARD THRO MAINS,GAS,BATTERY MANY TIMES TO GET SWITCH TO CONNECT. IF THIS FAILS TO WORK THEN PULL THE FRIDGE FORWARD ABOUT 8INCHES AND ON THE FRONT OF THAT SWITCH IS A RED AND BLACK WIRE, PULL THEM OFF AND CONNECT TOGETHER THIS BYPASSES THE SWITCH AND GOOD CHANCE IS YOUR GAS WILL REMAIN LIT. IF SO YOU NEED A NEW SELECTOR SWITCH.GOOD LUCK
 VIV
 May 2009 |
Get on to the chap who fitted the burner if you haven't used it since he fitted burner and tell him it's not working. If you have used it since then it could be co-incidental the thermo coupler has gone or moved away from the flame in it's bracket. No to fixing it yourself it has to come out again.
Nobby
March 2009 |
2005
