Chris Thanks for the reply and advice.
No cams on the sash on this window though.
Eventually found that a pin was not locating correctly in a hole in the top leaver. So removed the window, cleaned everything up, sprayed with G70 and re-fitted the window. Now works a treat again.
Hope this might help if someone has a similar window.
Pity there is no way to add a photo.
Barry August 2010 |
sounds like when u r trying to open it one of the roller cams situated on sash is not clearing 1 ov your keeps on the frame take 1 keep of frame at a time and keep checking for opening refit the keep u taken off in sequence when u find the keep that is the problem just move it over so the cam does clear remember only take 1 keep off at a time not all at once
chris July 2010 |