Alan, Check around the motor for rusty water marks. Perhaps some water has gotten in and is causing a short. I had this on a Servis Caress 1500 and that's what it was. I fitted a bit of plastic to prevent water going in and no more problems.
Munro April 2008 |
hi did you have any luck with this as i have exact same problem thanks
craig April 2008 |
Dug a bit further though now its daylight. Have found that if I unplug the cables (9 way plug) from the main board at the bottom left of the machine, to the motor. Then when I operate the doorswitch, it doesn't trip the RCD. Is there something on the motor that's made live when the door is closed, which might have an earth fault?
Thanks,
Alan March 2007 |